������Ƶ

• Go to: Start > Control Panel > Network Connections.
• Select the icon labelled Wireless Network Connection and right click on it. Select Properties from the menu.
• Click on the Wireless Networks tab. Press the Add button, which will bring up the Wireless Network Properties dialogue. The first tab in the wireless properties dialogue is labelled Association. Fill in the following values: Network name (SSID): UoL Libraries; Network authentication: WPA; Data encryption: TKIP
• Now select the second tab in the wireless properties dialogue labelled Authentication. Select EAP Type: ProtectedEAP and untick the box labelled Authenticate as computer when computer information is available.
• Then press the button labelled Properties.
• On the Protected EAP Properties dialogue, untick the box labelled Validate server certificate and press the Configure button next to Select Authentication Method. In the EAP MSCHAPv2 Properties dialogue, untick Automatically use my Windows logon name and password (and domain if any).
• Click OK on all boxes to close them

Connecting to the wireless network

• A speech balloon should pop up from the system tray at the bottom right-hand side of your screen. Click on it.
• Windows will now open a new dialogue box asking for your user name and password.
• Enter the barcode number from the front of the library card (without the spaces) as the user name.
• Enter your last name in lower case as the password. For example, if your last name is “Smith”, you would need to type “smith” as your password.
• If your login is successful, then the entry in the wireless network list for UoL Libraries should change to Connected. You will now be able to use the Internet.
• If your login was unsuccessful, then a balloon will pop up asking you to try and enter the details again.
• At this point, you can either click on the balloon which will open the login dialogue again, or disconnect from the wireless network and try again.

• Click Start > Control Panel
• Double click Network & Sharing Centre
• Once the Network & Sharing Centre opens click Manage wireless network.
• In the Manage Wireless Networks dialogue window click Add
• Click Manually create a network profile.
• Enter UoL Libraries in the Network name text box.
• Select WPA-Enterprise from the Security type selection drop-down and an Encryption type of TKIP. The Start this connection automatically checkbox needs a tick in it. Click Next.
• Click Change connection settings
• The property page for the wireless connection just created opens. Enable ‘Connect automatically when this network is in range’ and ‘Connect to a more preferred network if available’.
• Switch to the security tab of this property page to verify you have the setting. Click the Settings… command button.
• Untick the Validate server certificate and tick Enable Fast Reconnect checkboxes. Click the Configure… command button. Untick the Automatically use my Windows logon name and password (and domain if any). Click OK.
• Click the buttons of any open dialogue windows.

Important For Windows 7 users

Untick Remember my credentials for this connection each time I’m logged on. Click on Advanced Settings, tick Specify Authentication Mode and select User Authentication. Click OK and close.

• You should see a pop-up in the bottom right-hand corner of the screen asking you to provide login credentials. Enter the login details (username is your membership number and password is your surname in lower case) remembering to leave the Login domain textbox blank. If the credentials are correct you should get connected to the UoL Libraries wireless network.

Quick Connect:

1. Hover over the right side of the screen and select ‘Settings’
2. Go to ‘Networks’ and tap/click on UoL Libraries
3. When asked enter your username enter your membership number and your  password is your surname in lowercase.

Connect Manually

1. From the new Metro Start screen press Desktop.
2. Right-click on the wireless icon in the bottom right of the desktop and select “Open Network and Sharing Centre”.
3. Select “Setup a new connection or network”.
4. Select “Manually connect to a wireless network” and click ‘Next’.
5. Enter the following details:Network name: UoL Libraries
6. Security type: WPA2-Enterprise
7. Encryption type: AES
8. Click ‘Next’.
9. Click ‘Change connection settings’.
10. Select the ‘Security tab’.
11. Click ‘Settings’.
12. Untick the box labelled ‘Connect to these servers’.
13. Click ‘Advanced Settings’.
14. Tick the box labelled ‘Specify authentication mode’ and select ‘User authentication’ from the drop down menu.
15. Click ‘OK’, ‘OK’ again and ‘Close’

You are now ready to connect.

1. Click on the wireless signal icon in the bottom right of the desktop.
2. Select ‘UoL Libraries’ and press ‘Connect’.
3. When asked enter your username enter your membership number and your  password is your surname in lowercase.
4. Click ‘OK’.

You should now be connected to the UoL Libraries wireless network.

Apple MacOS (formerly OSX)

• Click on Airport at the top right of your screen
• Click on UoL Libraries in the list of connections
• Enter your library card barcode number (which appears on the front of your Library card) as user name
• Enter your surname (in lower case) as password. See the login information section above for more details
• Click OK. Click Continue in the warning message that pops up

If this does not work, try the following:

• On Airport click Join a Network.
• From the option list select ‘UoL Libraries’.
• Under encryption type select WPA – Enterprise
• Enter your library card barcode number (which appears on the front of your Library card) as user-name.
• Enter your surname as password

For further assistance please refer to 

• Click on the wireless icon in the top bar and choose UoL Libraries
• Set the EAP method to PEAP
• Set Phase 2 authentication to MSCHAPv2
• Change the Server CA certificate to Do Not Check
• Enter your Identity as your membership number
• Enter your surname as your password.

Left-click on the wireless networks icon in the top right of the screen, and right-click on UoL Libraries:

• Authentication: WPA Enterprise
• EAP Method: PEAP
• Identity = library card number
• Password = surname (lower case)
• Anonymous Identity: leave blank
• CA Certificate File: In the Choose a Certificate Authority certificate… dialog, navigate to /etc/ssl/certs and select the ‘AddTrust_External_Root.pem’ certificate and click ’Open’

• Tap Settings > Wi-Fi, and make sure Wi-Fi is turned on. Your device will search for available Wi-Fi networks.
• Tap the name of the Wi-Fi network you'd like to join.
• When asked enter your username enter your membership number and your  password is your surname in lowercase.
• After you've joined the network, you should see a tick next to the network, and the wireless symbol in the upper-left side of your display.

• Open the Settings app.
• Choose Wi-Fi.
• On some Samsung tablets, you find the Wi-Fi item on the Connections tab. Choose Wi-Fi to view a list of available Wi-Fi networks on the right side of the screen. Otherwise, the list shows up full screen.
• Choose a wireless network from the list.
• When no wireless networks are listed, you’re sort of out of luck regarding Wi-Fi access from your current location.
• When asked enter your username enter your membership number and your  password is your surname in lowercase.
• Touch the Show Password check box so that you can see what you’re typing; some of those network passwords can be long.
• Touch the Connect button.
• The network is connected immediately.